* Standard finish-No extra charge
Special finishes contain pigments,white cement and/or special aggregate that are transported from out-of-state. Extra charges are based on material, batch size and quantity. Prices are quoted on a per-job basis. Call for more information.
Available in a variety of colors, call for more information.
Sand: washed torpedo sand. Stone: 3/8″ washed gravel. Cement: very light gray color 7 to 7.5 bags per cubic yard. Water reducers used to increase durability. Chemically entrained air (6-8%) causes concrete to be salt & chloride resistant. Average strength (after 28 days) 5000 PSI minimum. Concrete cured indoors under plastic cover before exposure to outside air. EXPECTED LIFE OF CONCRETE 30 YEARS MINIMUM. MEETS ASTM SPECIFICATIONS.
ACR1 GLOSS ACRYLIC SEALER
Enhances the beauty of the stone, resists salt, chloride and makes graffiti cleanup easier. Gives the stone a “wet look.” Two coats applied. A solvent base gloss sealer, used mainly on EX finishes (exposed aggregate), produces deep rich colors in the aggregate. Also available on SB finishes by special order.
ACR2 NON-GLOSS SEALER
A clear, penetrating, non-visible, water repellent sealer can be used when gloss finish is not desired. Two coats applied. Used on EX and SB finishes to provide protection against the elements.
ACR3 SEMI-GLOSS ACYRLIC SEALER
Water based semi-gloss sealer used on EX and SB finishes (sandblast) to enhance and deepen the color of the finish it is applied.
Doty & Sons diamond grinds the top surfaces of benches, tables, & seats and softens edges and sides leaving beautiful surfaces. Diamond ground depth varies with finish. Exposed aggregate finishes are diamond ground removing the top surface of the aggregate. The finished surface will be smooth, but slightly dimpled. Sandblast finishes are diamond ground smooth.
Finishes shown are close up photos before diamond grinding. Due to variations in photographic reproduction, colors may vary slightly.